Print PDF
Favorite
Email
Step 2Cut out and sew the slipper upper together
Cut out Side 1 and Side 2 slipper upper pieces out of the felted wool (be sure the wool is smooth before cutting, my edges were a little curly). Place Side 2 right side up on your table.
Cut one bunny tail out of cream wool felt. Place the bunny tail on the back side of Side 2 about one inch from the bottom edge. Sandwich the bunny tail by placing the Right Side piece on top, right sides together. Pin the back seam and the top seam, leaving the bottom and foot opening unpinned and unsewn. Sew back seam and top seam using a 1/4" seam allowance. Repeat this for the other slipper.
Cut one bunny tail out of cream wool felt. Place the bunny tail on the back side of Side 2 about one inch from the bottom edge. Sandwich the bunny tail by placing the Right Side piece on top, right sides together. Pin the back seam and the top seam, leaving the bottom and foot opening unpinned and unsewn. Sew back seam and top seam using a 1/4" seam allowance. Repeat this for the other slipper.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
