loading

Step 1: Materials

For this project I used:
Materials:
Tools:
  • exacto knife
  • snips
  • heat gun
  • wire stripper
  • soldering iron
  • drill - 1" hole saw, and 13/32" bit for LED holes
  • hacksaw

I also used a laser cutter to make a jig, more on that later
 
This is the best.
Your a champion.
The time lapse is awesome! So happy this is finally up :D

About This Instructable

4,118views

18favorites

License:

Bio: I'm an Instructables success story! After relying on the site to DIY my way through art school, I was able to join the Instructables ... More »
More by audreyobscura:PVC Bathroom Shelf Canon EOS Foot Pedal Shutter Remote The Deleafer 
Add instructable to: