loading

Step 3: Jig for Assembling Matrix

In Corel Draw, I made a matrix of 16x8 10 mm Holes, then used an Epilog laser cutter to cut 3 sheets of cardboard. When the sheets came out of the laser cutter, I taped them together.

The LEDs fit nicely in there, and didn't wiggle around too much when I moved the matrix around.
This is the best.
Your a champion.
The time lapse is awesome! So happy this is finally up :D

About This Instructable

4,118views

18favorites

License:

Bio: I'm an Instructables success story! After relying on the site to DIY my way through art school, I was able to join the Instructables ... More »
More by audreyobscura:PVC Bathroom Shelf Canon EOS Foot Pedal Shutter Remote The Deleafer 
Add instructable to: