Print PDF
Favorite
Email
Step 2Assemblying the Binder Rings
a. Unfold the cardboard piece. (Folded in half in step 1.)
b. Center the binder rings. In this sample the binder rings are 1 in. but you can use any binder ring size.
c. Using an XACTO, make striations along the sides of the binder rings. DO NOT CUT ALL THE WAY THROUGH THE CARDBOARD. Just trace lightly along the edges. This makes bending the cardboard easier.
d. Choose either duct tape or gorilla glue to attach the binder in the center of the cardboard piece. I used Duct Tape to attach the binder rings.
b. Center the binder rings. In this sample the binder rings are 1 in. but you can use any binder ring size.
c. Using an XACTO, make striations along the sides of the binder rings. DO NOT CUT ALL THE WAY THROUGH THE CARDBOARD. Just trace lightly along the edges. This makes bending the cardboard easier.
d. Choose either duct tape or gorilla glue to attach the binder in the center of the cardboard piece. I used Duct Tape to attach the binder rings.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
