Print PDF
Favorite
Email
Step 3Finishing touches
a. Once the binder ring is fastened by either DUCT tape or gorilla glue. Fill with paper of your choice.
NOTE: For DURABILITY I advise backing up the gorilla glue with duct tape.
b. Using a rounded rectangle or free hand - trace a rectangle about 1 inch from the edge.
c. On onside cut out the rectangle completely and remove.
d. On the other side of the binder - cut the shape out with the exception of the bottom part. This can be folded down and tucked into the other side as a fastener. See images.
NOTE: For DURABILITY I advise backing up the gorilla glue with duct tape.
b. Using a rounded rectangle or free hand - trace a rectangle about 1 inch from the edge.
c. On onside cut out the rectangle completely and remove.
d. On the other side of the binder - cut the shape out with the exception of the bottom part. This can be folded down and tucked into the other side as a fastener. See images.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
