Introduction: Bicycle GPS / HP Charger

Picture of Bicycle GPS / HP Charger

provide tools and materials such as the following

tools:
solder, tin, cutter, insulation etc.

material:
bicycle dynamo, 2 ea 220μF capacitor elco, 1 ea 1 ampere diode, IC 7805 1 ea and cable

Step 1:

Picture of

assembled components as shown below

Step 2:

Picture of

after all is assembled, insulation on the armature circuit and plug it set up right on fork

Step 3:

Picture of

Step 4:

Picture of

Comments

momon_crot (author)2012-04-14

@dohens... ssiiiipppp bro...salam kenal

@naufan123.. iya bro...ni project coba coba...mau cari juga yang 12v, tapi belom sempet,


thanks all

dohens (author)2012-03-29

Siip ternyata banyak kawan dari Indonesia yang main di instructabeles.com

naufan123 (author)2012-03-28

hey! anda orang indonesia ya? sya menyarankan dynamo nya ganti sama yang 12v lebih mantap! i follow you! saya mengikuti mu!

About This Instructable

7,420views

32favorites

License:

More by momon_crot:PROJECT DIY TALKBOX #3 : LAMBEMUDIY footswitch for zoom B3 and zoom G3bicycle GPS / HP charger
Add instructable to: