With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
This is my lastest "Green" Holdiday Twirlabout thingy! It can encompass any holiday by simply changing the inside components! This upcoming holiday ha...
I started this instructable with a 3 Liter soda bottle. Washed and dried.
A very sharp exacto knife or scizzors is needed here. Scizzors are the best bet , they much safer. The knife needs a strong, steady hand! Be careful!!...
You can measure and mark out the fins with a felt tip marker or grease pencil. The fins are 1/2 to 3/4 inch wide, your choice. Start at the point wher...
Mark a line where you want the fins to bend .Bend each fin outward and pinch the fin hard between your fingers. About halfway is good. If some don't l...
Make a hole in the cap and the bottom of the bottle. Just the size of your string or wire or yarn you will hang and shape the bottle by pulling the s...
Run some string through the bottom first, then bring it up and through the hole in the cap (off the bottle). Tie a not on the bottom end.
Screw the cap back on the bottle. Then compress the bottle down against something. I used my chest. Then when the flared out fins look nice tie a not ...
Now the fun starts! Stuff your bottle with anything that will make it look cool inside. Sort of a collage. This upcoming holiday is St. Patrick's Day....
Hang your creation up where all can enjoy! I stuffed mine with some ribbon, green beeds, shamrocks, and silk flowers. Use your imagination. And then o...
As I said, this thingy can change with each holiday! So I gathered up some Easter eggs, a classic old bunny toy, shiny ribbon, and placed them inside...
Remove these ads by
Signing Up
Not NiceInappropriateSpam275 views
1 favorites
Posted:
Mar 15, 2012
License:
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »