Instructables

GTP USB PIC PROGRAMMER (Open Source)

Featured
This work includes, GTP USB (not plus or lite) .

The schematic, photos and PCB have been developed by PICMASTERS based on
some valuable works done before.

This programmer supports pic10F, 12F, 16C, 16F, 18F,24Cxx Eeprom.

Unfortunately, it works with only Winpic800 v.355.

We have succesfully tried it with some pics; PIC18F252, 18F2455, 18F2550,
18F2520, 16F84, 16F628 and 24C32 eeprom.

The best and fastest method of pic programming.

All you need (hex file, winpic800, schematic, PCB board in ARES)
are included.

You must program pic18F2550 with hex file by a classical programmer.

Just leave a good fedback for us.
 
Remove these adsRemove these ads by Signing Up

Step 1: Circuit scheamatic

Picture of circuit scheamatic
Gtp-Usb-Zif-Schematic.bmp
circuit schematic. You can see the type and value of the companents.

Step 2: Circuit layout

Picture of circuit layout
Placa_ok copy.tif
Circuit layout.

Step 3: Top layer

Picture of top layer
placa_ZIF_1 copy.tif
top layer lay out.

Step 4: All of the documantries

You can find usb driver, layout of the circuit , all of the pics of the circuit, and hardware setting program

Step 5: Pics

Picture of pics
Photo2.JPG
Photo3.JPG
Photo6.JPG
COLLECTING THE DATA IS ONLY THE FIRST STEP OF THE WISDOM, BUT SAHRING DATA IS THE FIRST STEP OF COMMUNITY.
sekar66971 year ago
Hi very nice
pleas i want to ask about the cable in the left side in the picture
what it's job and where it's connected
i'am waiting for your replay
and thank you again
efdat2 years ago
please which software do you use?
Indeed nice work , but what Shani_17pak says, it was nice if you placed the used components on the pcb's so the people don't have to search where to place the components.

But keep up the good work.
shani_17pak3 years ago
nice work! but 1 think i need that you do not provide us that the component pcb layout that which component is solder on which hole. plese send that simple layout so i done my work thanks dear. i need it becuse i am new in this fieald and a hobbiest kindly help me out. bye (shani_17pak@yahoo.com)
erdogan.553 years ago
an excellent work, his mind health. vesselam
zaw min tun3 years ago
thank you so much.
diversant4 years ago
thank you for this wonderful work 
thank you for this wonderful work
pleas i want to ask about the cable in the left side in the picture
what it's job and where it's connected
i'am waiting for your replay
and thank you again
sardarg5 years ago
BUDDY You are doing Great...!
Keep it uP..
dabyziyo6 years ago
AWESOME work, can't wait for my 18F2550 order to make it!!