Print PDF
Favorite
Email
Step 3Preparing the mouse - 2
The pictures will show you where the holes need to be drilled.
the middle of each button should be the place to drill to add the electrodes.
Basically choose the place which seems natural to you. the electrodes should connect to the tops of the fingers (where ones finger prints are).
Another 2 holes need to be drilled in the mouse structure itself in order to pass the wires
the middle of each button should be the place to drill to add the electrodes.
Basically choose the place which seems natural to you. the electrodes should connect to the tops of the fingers (where ones finger prints are).
Another 2 holes need to be drilled in the mouse structure itself in order to pass the wires
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
