Print PDF
Favorite
Email
Step 7Adjusting the wire
The wire should look something like a spring.
Stretch the coil out until it is the approximate height of the jar.
Take your pliers and put a sharp bend at the coiled end of the wire. This is what the bottom of the jar will rest on.
At the top of the coil, put a 90 degree bend in the wire. This will extend up.
Put the jar back in and see how it fits. If the wire is too tight/loose, remove the jar and expand/contract the coil by grasping the top & bottom and twist (kind of like wringing out a rag).
Stretch the coil out until it is the approximate height of the jar.
Take your pliers and put a sharp bend at the coiled end of the wire. This is what the bottom of the jar will rest on.
At the top of the coil, put a 90 degree bend in the wire. This will extend up.
Put the jar back in and see how it fits. If the wire is too tight/loose, remove the jar and expand/contract the coil by grasping the top & bottom and twist (kind of like wringing out a rag).
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
