Step 2: Frames
Construct 2 frames using the 28" and the 33" 2x4's and the 3.5" deck screws. Make sure they are square - or at least square-ish.
If you cut different sizes (or even to double check the layout) I recommend placing the 2 x 4's on top of the cut plywood to ensure that you have the boards lined correctly. On my bench, the 28" board is on the sides and the 33" are on the inside of the 28".
If you cut different sizes (or even to double check the layout) I recommend placing the 2 x 4's on top of the cut plywood to ensure that you have the boards lined correctly. On my bench, the 28" board is on the sides and the 33" are on the inside of the 28".
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
