Introduction: Garmin Forerunner 10 Watch Clip

Picture of Garmin Forerunner 10 Watch Clip

Garmin makes some great GPS watches, but their watch bands do not last and they are expensive. The last time my wife’s Forerunner 10 band broke, we decided to make a clip to replace the band. The band sells for about $20 while the clip only uses about 20 cents of filament. The clip is multi-functional and can be attached to the waistband of your shorts, the neckband of your shirt, the bill of your hat, etc.

Step 1: Remove the Broken Band

Picture of Remove the Broken Band

1) Remove the old watchband by using a jeweler’s crew driver to remove the pins between the band and watch face.

Step 2: 3D Print the Clip

Picture of 3D Print the Clip

Step 3: Assemble & Go for a Run.


About This Instructable




More by mrkdiller:Garmin Forerunner 10 Watch ClipSpin CoasterSpin Balancer
Add instructable to: