Step 7: Affix the Can to the Snorkel
Make sure the tube doesn't protrude all the way into the can.
Drill a hole through the can flaps and the end of the snorkel tube.
Insert a wire through the holes.
Bend the ends of the wire over.
The assembly will feel pretty secure.
Drill a hole through the can flaps and the end of the snorkel tube.
Insert a wire through the holes.
Bend the ends of the wire over.
The assembly will feel pretty secure.
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
