With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
When using cofferdams for flood control on slopes, a bracing system is necessary. This DIY Instructable will guide you through five simple steps to he...
Cut the pieces of the brace to the dimensions and angles shown on the drawing.
Screw or nail the pieces of the brace together. Be sure to use the dimensions from the drawing to assemble the brace correctly.
Now repeat steps 2 and 3 to make a second brace.
Connect an 8' beam over the top of both braces as shown in the picture. This can be done with screws or nails.
Set the bracing system 6' from each side of the cofferdam.
The step-by-step instructions with drawings and pictures are on the attached file.
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »