Introduction: Gears of War Tribute USB

Picture of Gears of War Tribute USB

My first Instructable...

-Wood
-Acrylic Plexiglass
-2 Red LED lights 1.5 volts
-100 ohm resister
-I used lots of Hot Glue, Foam, Guerrilla Tape, and Tin Foil...

I spent a whole 1 hour and 30 minutes on this project, not hard at all...
And it is very, very bright!!!

Some pictures are taken with a piece of canvas placed over top so that it is not as bright...

Comments

About This Instructable

872views

1favorite

More by DrueGrunt:Gears of War Tribute USB
Add instructable to: