Perfect for techies.

Step 1: Tools and Materials

1. Drill and bit

2. $ Store picture frame

3. Old circuit board of some sort

4. Couple small screws

5. Sharpie marker

Step 2: Remove the Glass From Picture Frame

Step 3: Remove the Circuit Board

In my case this is from a 1995 cd rom

Step 4: Mark and Drill Your Holes

Lay out glass on board, mark holes at approximate center of each side, just outside edge of glass. Drill the 4 holes.

Step 5: Turn in Screws and Add Favorite Picture.

Drill hole for mount to wall. Done.

<p>So simple, and so geeky. Very cool!</p>
<p>Thank you.</p>

About This Instructable




Bio: Saving the world..... without a cape.
More by aaahotdog:DIY Drip Coffee Brewer Removing labels from pill bottles and other bottles Totally Free Upcycling Item So Don't Throw Yours Away 
Add instructable to: