Step 10:
Now click the "Select" button under "Tool". A dialog box will appear that allows you to set a variety of settings.
1. I picked a .125" end mill.
2. I set the cut depth per pass at .026 inches (5 passes to get through to .130 inch depth I set earlier)
3. I set the feed rate at 20 inches per minute (this is how fast the end mill moves sideways when cutting)
4. I set the plunge rate at 10 inches per minute (this is how fast the end mill descends into the material)
5. I set the RPM to 15,000.
1. I picked a .125" end mill.
2. I set the cut depth per pass at .026 inches (5 passes to get through to .130 inch depth I set earlier)
3. I set the feed rate at 20 inches per minute (this is how fast the end mill moves sideways when cutting)
4. I set the plunge rate at 10 inches per minute (this is how fast the end mill descends into the material)
5. I set the RPM to 15,000.
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
