Introduction: Generator With Motor

Hello Friends I am Ajay G From Banjarapalya E4D makerspace .

If anybody wants to do this toy generator with motor it is to easy .

Materials

  1. wooden board
  2. Rubberbends
  3. Ied bulbe
  4. some old cD
  5. Straws
  6. Matel rod
  7. Motor
  8. Wires
  9. Wooden piece
  10. Nail
  11. Screws

Tools

  1. Sholdering gun
  2. Hot gluee
  3. Drilling machine
  4. Scessor
  5. Knife

Step 1: Drilling the Small Wodden Piece

First we Need to Drill the small wodden piece.

Step 2: Fixing the Wooden Piece to the Wooden Board

Take one wooden piece and take one wooden board and fix it with the help of nail.

Step 3: Fixing the Two CD

Tack the to CD's and take one card board cut the card board round shape and place with infrount of to CD with the help of gluegun.

Step 4: Fix the CD to the Wooden Board

Fix the CD's to the wooden board with the help of screws.

Step 5: Cut the Straws

Cut the straws with the help of scissor.

Step 6: Put the Wire Inside the Straw

Put the wire into the cutted straws.

Step 7: Sholdering the Wire

We need to sholder the wire to the end of the motor.

Step 8: Fixing the Motor With the Help of Gluegun

We need to fix the motor with the help of gluegun and metal piece.

Step 9: Tag the Rubberbend to Motor

Tag the rubber bend to the CD and for the motor also.

Step 10: Rotate the CD With the Help of Screw

Last thing what we want to do means rotate the CD with the help of screw and the led will blink .

Comments

author
aosafmohd (author)2016-10-08

Hi there! I am making a hydro power. I am using a 6 volts motor to light up an led. I am not able to do so. Can u assist me as to where I am going wrong.

author
hillyhills (author)2015-10-19

Can you take a video of how your stuff works? Thanks!!

author
hillyhills (author)2015-10-19

Can you take a video of how your stuff works? Thanks!!