Print PDF
Favorite
Email
Step 3ASSEMBLY METHOD 2: Assemble on foam core board
This makes the most rigid model, but is the most work.
If you use foam core you should cut 45 degree cutouts at each fold point so that the model comes together. You do not need the tab on the left side of the model or at the top of the door panel when working with foam core due to its thickness.
Look at the attached pictures for details.
If you use foam core you should cut 45 degree cutouts at each fold point so that the model comes together. You do not need the tab on the left side of the model or at the top of the door panel when working with foam core due to its thickness.
Look at the attached pictures for details.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
