Print PDF
Favorite
Email
Step 4All Done and Some Suggestions
Your done!
Some suggestions for enhancing your model are:
1) Cut out call letters of your choice and attached them to the outside of the mode giving it more of a 3D effect.
2) Add blinking LED lights. Many radio towers feature blinking lights and red LEDS would perfectly fit this bill. You could poke them through the sides or have them just on top. There is plenty of space in the tower to hold the batteries to power the LEDs.
3) Fill the tower with foam. To make you tower even more durable, fill it with some spray expanding foam (sold at places like Home Depot for filling cracks and holes). You will need to watch that the foam does not deform your tower as it expands.
4) Scale the model. As mentioned in the opening, GeoTrax' are not scale models. This means one building is built on one scale and another building is built on another scale. So, feel free to print this model out smaller or larger as you see fit.
Some suggestions for enhancing your model are:
1) Cut out call letters of your choice and attached them to the outside of the mode giving it more of a 3D effect.
2) Add blinking LED lights. Many radio towers feature blinking lights and red LEDS would perfectly fit this bill. You could poke them through the sides or have them just on top. There is plenty of space in the tower to hold the batteries to power the LEDs.
3) Fill the tower with foam. To make you tower even more durable, fill it with some spray expanding foam (sold at places like Home Depot for filling cracks and holes). You will need to watch that the foam does not deform your tower as it expands.
4) Scale the model. As mentioned in the opening, GeoTrax' are not scale models. This means one building is built on one scale and another building is built on another scale. So, feel free to print this model out smaller or larger as you see fit.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
