Print PDF
Favorite
Email
Step 5Fix the mounting to the hat.
Using more of the insulation tape, fix the mounted LEDs under the brim of the hat.
I lined the entire underside of the brim in black tape to make everything less obvious, and fed the lead through the inside of the hat and down my back.
I also added small pieces of insulation tape to the front-facing sides of the LEDs, both to try and conceal them, and to cut down on stray UV.
The lead goes down my back and into my pocket, where I attached a small battery pack and a push-switch (so the LEDs only stay on while I press the button).
I lined the entire underside of the brim in black tape to make everything less obvious, and fed the lead through the inside of the hat and down my back.
I also added small pieces of insulation tape to the front-facing sides of the LEDs, both to try and conceal them, and to cut down on stray UV.
The lead goes down my back and into my pocket, where I attached a small battery pack and a push-switch (so the LEDs only stay on while I press the button).
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
