With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
I will show you how to use a standard shoelace as a Geta strap (thong) to add some western flare to your eastern footwear. You will need: a pair of ...
Loop the toe loop of your geta so it can hold the strap. Fold the top of the loop down to make two loops on the end. Fold the two loops together.
Place the shoelace through the toe loop and shift it so the ends of the shoelace are even. Feed the shoelace through the holes in the rear of the ge...
Feed the shoelaces up through the opposite holes and pull tight.
Pull the shoelaces back a little so they are loose. Insert your foot and pull on the shoelaces to adjust them to the size of your foot.
Remove your foot being careful not to change the adjustment of the strap Loosen the toe loop Feed the shoelaces through the toe loop Make sure the sh...
Tie the ends of the shoelaces off as if you were tieing your shoes. www.instructables.com/id/how-to-tie-your-shoes/
Check the fit of the strap Readjust if necessary Enjoy your footwear
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »