With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
I will show you how to use a standard shoelace as a Geta strap (thong) to add some western flare to your eastern footwear. You will need: a ...
Loop the toe loop of your geta so it can hold the strap. Fold the top of the loop down to make two loops on the end. Fold ...
Place the shoelace through the toe loop and shift it so the ends of the shoelace are even. Feed the shoelace through the holes in the rear of ...
Feed the shoelaces up through the opposite holes and pull tight.
Pull the shoelaces back a little so they are loose. Insert your foot and pull on the shoelaces to adjust them to the size of your foot.
Remove your foot being careful not to change the adjustment of the strap Loosen the toe loop Feed the shoelaces through the toe loop Make sure the shoelaces are adjusted the same ...
Tie the ends of the shoelaces off as if you were tieing your shoes. www.instructables.com/id/how-to-tie-your-shoes/
Check the fit of the strap Readjust if necessary Enjoy your footwear
Join 2 million + to receive instant DIY inspiration in your inbox.
Download our apps!
© 2016 Autodesk, Inc.