Introduction: Getting More Voltage on Power Supply

Picture of Getting More Voltage on Power Supply
in this instructable we will get more then 12v from atx or a wallwart by using wallwarts and/or atx psu

DO IT AT UR OWN RISK I WILL NOT BE RESPONSIBLE FOR BREAKING THINGS.

For chat and techbook visit my website http://delphijustin.tk


Step 1: Wiring It Up

Picture of Wiring It Up

Wire each power supply like in the diagram below

Step 2: Done!

Picture of Done!

Hook the meter up to +12V yellow  and negative on wallwart/second device. also if u use atx psu hook green to black

Comments