Getting started with VMUSIC2

Step 4 Start talking

Start up hyperterminal or whatever serial communication program you like and create a connection on the com port of your converter with these settings:

9600 Baud Rate
8 Data Bits
1 Stop Bit
No parity
No Handshake or Flow Control

You might also want to turn on local echo so that you see what you are typing. The VMUSIC module does not provide remote echo.

Once you have a connection established, connect the 5V on the VMUSIC.

You should see a prompt that looks something like this:

Ver 03.64-COMVMSC1F On-Line:
No Disk
No Upgrade

Now insert your flash drive, and it should report that a device is detected on Port 2 (P2) and give you a D:\> prompt indicating that it is now ready to accept commands!