Step 4: Wire It Up!

Using the diagram, wire it up!

<p>Nice write up. The diagram is a bit wrong however. The ground from the sensor is connected to the power on your breadboard diagram. Black wire from sensor should connect to black horizontal row on breadboard, not the power horizontal row.</p>
I need help!!! <br> <br>I am working on a project for school and I need it to work to graduate. My project is to integrate a proximity/ sonar sensor onto an RC car to make it stop if it gets within a certain distance from an obstacle. before I can even begin to worry about integrating the sensor on the car I need to get it to work with the arduino uno. I am having difficult getting the program to work for the sonar sensor. I know that the original schematic and code was designed to work with an arduino diecimila, but all I could find was an uno. what can I do to make this work? I am using the maxbotix sonar sensor and the piezo buzzer used in the quick start guide. Please help me out
Nice tutorial. <br /> <br />I'm doing a similar project and I'd like to document it but I'm unable to locate the fritzing part for the MaxBotix sensor. Did you create this one on your own?
is their any way you can make a trigger with a tela photo lens. but remeber the light that triggers it is emeral and its about 25 feet away if you could help out post back.
What advantages/disadvantages do the other pin outs offer?<br /><br /><br />
The preview feature assumes the view actually works correctly...<br /> <br /> http://www.maxbotix.com/MaxSonar-EZ1__FAQ.html#Tell_me_how_the_serial_pulse_width_and_analog_voltage_outputs_compare<br />
<a href="http://www.maxbotix.com/MaxSonar-EZ1__FAQ.html#Tell_me_how_the_serial_pulse_width_and_analog_voltage_outputs_compare">www.maxbotix.com/MaxSonar-EZ1__FAQ.html#Tell_me_how_the_serial_pulse_width_and_analog_voltage_outputs_compare</a><br />
<a href="http://www.maxbotix.com/MaxSonar-EZ1__FAQ.html#Tell_me_how_the_serial_pulse_width_and_analog_voltage_outputs_compare">www.maxbotix.com/MaxSonar-EZ1__FAQ.html#Tell_me_how_the_serial_pulse_width_and_analog_voltage_outputs_compare</a><br />
Nice diagram. What program did you use to generate it?<br />
<a href="http://fritzing.org/"><br /> fritzing.org/</a><br />
like that green circle thing on a submarine that shows where things are?
so what does this actually do?
its SONAR (sound navigation and ranging) it is like what bats have to see because they are sort of blind.... a,k.a Uber- Hearing

About This Instructable




Bio: All-original DIY electronics kits - Adafruit Industries is a New York City based company that sells kits and parts for original, open source hardware electronics projects ... More »
More by adafruit:Adaruit Resistor Helper Adafruit Photo Tutorial Logger Shield: Datalogging for Arduino 
Add instructable to: