The original, and classic, Ghostbusters is simply put, one of the best comedies ever made.
Along with the ghost trap and PKE meter, the proton pack is one of the coolest movie props seen on screen.
With my guide through video I will show you how to make the Ghostbusters' Proton Pack on a budget.
Watch my video guiding you through the process to making your very own Proton Pack!
It's short, easy to understand, and could help greatly!
SUBSCRIBE For More How To Guides: ThatJustinK YouTube Channel
Getting started with the proton pack means you'll need this list of materials
Plastic water bottle
Misc. product boxes
Plastic storage tubes
Caps (from bottles, and other items)
Clear bending straws
Spray paint bottle caps (or hairspray cap)
Black, red, and blue wire
Steel nipple fitting
Old backpack (for straps)
Spray paint (Flat black, silver, army green)
Cardboard (lots of cardboard)
For Light Up Feature:
3 Push lights
Plastic wand toy (Dollar Store)
This list is fairly simple considering many details are simply finding random objects, and all of the above are cheap and affordable!
The proton pack is made up of several specifically shaped objects and pieces that are built up using the materials from the previous step.
The video gives a better explanation of how to actually piece these together, but they are fairly simple and easy.
Use reference photos! they are key to this project.
With any homemade props its always important to give the most realistic look possible using your resources.
With a project that is mainly cardboard, plastic tupperware, containers, and misc. kitchen appliances detailing and weathering is a high priority to bring your proton pack to life. \
Acrylic paints are recommended.
What will make this project stand out is the light up feature that is actually one of the easier things to pull off.
Using 3 Dollar Store push lights, they are glued to the surface of the cake pan matching with the open circles of the cake container for the lights to shine through.
Velcro is applied to the right side of the cardboard bar going across the Cyclotron that allows you to open the container and access the lights.
To make the proton pack wearable, we are going to use PVC pipes, and foam tubes to create a back frame to tie the straps onto later.
It also gives back support and comfort.
The straps are from an old broken backpack spray painted army green and easily tied and glued around and onto the PVC frame from top the bottom.
An optional guitar stand is available on Amazon to display your finished proton pack.
This is bar none my favorite project to date, and the most screen accurate.
Taking about a week to complete and costing near $50 for all materials, I'd say this is a knockout success.
This prop like my others is much easier to follow with the guide through video. This is a very visual process and explanation through text will not do justice.
I'm happy with the result, and If you decide to make your own proton pack and have any questions leave a comment on YouTube or on Instructables. I'll be happy to answer!
And if you decide to make your own, post some photos here or send some photos to: firstname.lastname@example.org and I'll feature it in my next DIY video!
Have fun making your own unlicensed nuclear accelerator.