Print PDF
Favorite
Email
Step 17Materials
motor (make sure it's strong, mine wasn't strong enough so I couldn't add to many decorations)
a skull (picked up at Michaels for 5 dollars)
2x 24 inch piece of wood
2x 20 inch piece of wood
1x 12 inch piece of wood
1x 6 inch piece of wood
1x 4 inch piece of wood
NOTE: the kind of the of the wood doesn't really matter, between 1 and 2 inches wide are good, the thickness of the wood should be kept to a minimum, like around 1/8 to 1/4 of an inch.
5 inch long dowel
some scrap wood
some big piece of wood for a base
old white dress shirt
8x nuts and bolts
a bunch of washers
a skull (picked up at Michaels for 5 dollars)
2x 24 inch piece of wood
2x 20 inch piece of wood
1x 12 inch piece of wood
1x 6 inch piece of wood
1x 4 inch piece of wood
NOTE: the kind of the of the wood doesn't really matter, between 1 and 2 inches wide are good, the thickness of the wood should be kept to a minimum, like around 1/8 to 1/4 of an inch.
5 inch long dowel
some scrap wood
some big piece of wood for a base
old white dress shirt
8x nuts and bolts
a bunch of washers
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
