Introduction: Giant Eyeball
This procedure will show you how to make a giant eyeball for a prop. Read the steps below and enjoy!
Step 1: Gather Paints
Take the colors of dark blue, light blue, green, white, and black. Make sure the paint is acrylic paint.
Step 2: Take Foam Ball
Get a 10 inch foam ball for the eye.
Step 3: Take Elmer's Glue
Get some Elmer's glue. This will mix with the paint, so it will stick to the foam.
Step 4: Mix Paint and Glue
Next, mix the white acrylic paint with the Elmer's glue.
Step 5: Paint the Ball
Paint the eye ball completely with the white paint and Elmer's glue.
Step 6: Dry the Eyeball
Put the eyeball in front of a fan or hair dryer, to dry the eyeball completely.
Step 7: Mix Black Paint and Glue
Next, mix the black acrylic paint with the Elmer's glue, just like you did before.
Step 8: Get a Half Foam Ball
Take a foam ball and cut it in half.
Step 9: Paint Half Foam Ball
Take the black paint mixed with the glue and paint it into the half foam ball for the pupil.
Step 10: Draw a Circle for the Iris
After the big foam ball has dried, draw a circle around the center of the ball for the iris.
Step 11: Take Dark Blue Acrylic Paint
Take the dark blue acrylic paint and put it on the plate for the iris.
Step 12: Paint the Iris
Take the dark blue acrylic paint and paint the circle that you drew. (iris)
Step 13: Dry the Iris
Next, put the foam ball in front of the fan to dry it completely.
Step 14: Take Light Blue Paint
Take the light blue acrylic paint and put it on a plate.
Step 15: Design the Iris
Take the light blue acrylic paint and crate a design on the iris just like the picture shown.
Step 16: Dry the Iris
Just like done before, dry the iris.
Step 17: Last of the Colors Needed
Take the colors shown in the picture above, and separate them on a plate.
Step 18: Last Designs
Then, create a design on the iris with the colors you have. Make sure it looks realistic.
Step 19: Black Half Foam Ball
Then, take the black half foam ball that you made earlier.
Step 20: Hot Glue Half Foam Ball Onto Eyeball
Next, put hot glue on the bottom of the foam ball and stick it in the middle of the iris.
Step 21: Finish Product
Lastly, there is your finish product.
We have a be nice policy.
Please be positive and constructive.