Print PDF
Favorite
Email
Step 6Web design...
We need to now build up the pieces that connect the center pipe to the walls of the seat.
Cut pieces a little larger than the gap.
Crease at the ends to make a gluing flap.
It helps to start out with smaller pieces to fit along as you go. Bash and glue in place.
The four pieces that eminate from the pipe fill out the entire inside profile of the seat.
Laminate two or three layers of cardboard. Be sure to bridge any seams or joints between the pieces of cardboard.
Cut pieces a little larger than the gap.
Crease at the ends to make a gluing flap.
It helps to start out with smaller pieces to fit along as you go. Bash and glue in place.
The four pieces that eminate from the pipe fill out the entire inside profile of the seat.
Laminate two or three layers of cardboard. Be sure to bridge any seams or joints between the pieces of cardboard.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
