Print PDF
Favorite
Email
Step 102nd Coating and painting
Using the nitrocellulose lacquer paint a layer down around the perimeter of the strike anywhere tips (as shown in photos 2 & 3)
Wait for the nitrocellulose to dry, and then cover off the areas above and below the newly dried nitrocellulose with painters tape (INCLUDING the very top of the strike anywheres, as shown in picture 5)
Spray paint it white.
THE GIANT MATCH IS NOW COMPLETE!!!
Wait for the nitrocellulose to dry, and then cover off the areas above and below the newly dried nitrocellulose with painters tape (INCLUDING the very top of the strike anywheres, as shown in picture 5)
Spray paint it white.
THE GIANT MATCH IS NOW COMPLETE!!!
| « Previous Step | Download PDFView All Steps | Next Step » |
4
comments
|
Add Comment
|
Jan 15, 2008. 5:54 PMkaseyraex3
says:
Just a question....did you have eyebrows after you lit the match?
Reply
Feb 22, 2008. 10:47 PMspursley
says:
That's hilarious.
Reply
Aug 10, 2007. 5:51 PMedhalfdead
says:
Probably the safest place to set it down with minimal risk of accidental 'striking' to get a good finished picture showing the most detail.
Reply
2
Aug 9, 2007. 4:57 PMRichardBronosky
says:
Notice how the last photo was shot "away from anything flammable"... oh, except for that carpet! ;-)
Reply
 |
Add Comment
|
