This one of a kind cute pig head can be used for a house, a building, or a restaurant! It's simple and every step is easy along with the build. Hope you enjoy!
Step 1: Step 1- the Base
Make a 22 by 22 pink square. You might want to fill in the hole with pink wool if your making it into a building.
Step 2: Step 2- Starting the Grid
At each corner, make a pink wool tower that goes up by 21 blocks
Step 3: Step 3- Finishing the Grid
Now between the towers, connect them with pink wool lines to finish the grid.
Step 4: Step 4- Filling the Grid
Now fill in the grid with pink to make a pink cube
Step 5: Step 5- Starting the Eyes
Make your space for the eyes. I prefer making it 5 by 4 and putting it two blocks from the side and two from the top.
Step 6: Step 6- Finishing the Eyes
As you can see from the pictures, make the white spot 2 by 3 and the black spot 3 by 3. I prefer making the black spots on the eyes face each other, or make them not facing each other if you want him not cross-eyed
Step 7: Step 7- the Nose
It doesn't matter where you put the nose but just make sure it's between the eyes and below them. Make the space 3 by 5 and put two holes in the middle
Step 8: Step 8- the Mouth
Make the mouth like so. And fill it in with black will too. Now you have the face.
Step 9: Step 9- Ears
Make the ears like in the picture. Put them in the top right or left corner of the left and right side of the cube.
Step 10: Step 10- Tail (optional)
Make the tail at the back how you want it to be.
Step 11: Step 11- Done!
Now you can do whatever you want with your new giant cute pig head!