Print PDF
Favorite
Email
Step 4The legs and fangs
The legs work much the same way as the body, but using only two layers of foam instead of four or five. Cut strips of foam sheet the length of the legs and then sandwich each leg wire in it using hot glue.
As with the body, use scissors to carve away excess foam and shape the legs.
The same process goes for the fangs. You may want to cut the strips of foam longer than the wire for the fangs so that you can carve the foam to a point without the wire getting in the way.
For comparison, the photos in this step show the foam both before and after the carving.
As with the body, use scissors to carve away excess foam and shape the legs.
The same process goes for the fangs. You may want to cut the strips of foam longer than the wire for the fangs so that you can carve the foam to a point without the wire getting in the way.
For comparison, the photos in this step show the foam both before and after the carving.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
