Step 1: Materials and Cut
8x4 foot piece of .25" plywood
Spray adhesive or spray sealer
See the image below on how to cut the single sheet into 2 legs.
You'll notice that the base of each thigh and each shoe is the same width. 2 feet. Half the board.
I just "eyed" the slant for the red shoes.
Step 2: Painting White
Trash cans make good stands!
Step 3: Taping and Black
I used 2" painters tape and "eyed" again the space between the white and black stripes. You want them to be similar but you really don't have them exact. If your OCD prepare to measure a lot!
Once you've got them taped, paint the black stripe and let it dry again.
Step 4: Shoes
Once all the tape is slowly removed, I used a piece of cardboard to block off the red paint. I used just standard spray paint, but I chose a glossy luster, since they are meant to sparkle.
RIGHT AFTER I SPRAYED IT, I added generous amounts of red glitter, sprayed it again, poured more glitter on (you really can't over - do this step). When I felt comfortable with the "shine" I then coated it in UV coating spray. Just to really seal the glitter on and help with the shine and keep it from turning into pink slippers in the sun. LET IT ALL DRY AGAIN!
Step 5: Prop and Light!
Know is the easy/fun part, drag these suckers to your front yard and play with the placement. Depending on the neighborhood you live in, you might want to anchor these ladies down, they could get stolen.
Play with some flood lights, and enjoy the compliments from the neighbors!
This whole thing was inspired by a "Death of a Witch" show that I've been working on. Look it up on Facebook! Its a photo show, and I've killed the witch all over my great state of Oklahoma! more at www.evantaylorphoto.com