Instructables
Picture of Glass Bottle Cutting
2.jpg
3.jpg
4.jpg
Step 1
 
Remove these adsRemove these ads by Signing Up

Step 1: Cont.

Picture of cont.
6.jpg
7.jpg

Step 2: Cont.

Picture of cont.
9.jpg
10.jpg

Step 3: Cont.

Picture of cont.
12.jpg
13.jpg

Step 4: Cont.

Picture of cont.
lalefty1 year ago
I find the instructions hard to read when they are over the pictures. Otherwise a nice instructible.
antioch1 year ago
Very nice, thank you!
ironsmiter2 years ago
a little cutting oil, on your scoring tool will make the cut MUCH cleaner. and prevent a majority of the shard popping you experience between scoring and separating.

If you plan on doing a lot of these, consider getting silicon carbide powder, and a piece of plate glass. It takes a little bit longer than using multi-grade sandpapers, but one small batch will last a long, long time. Just mix the grit with a little oil or water on the plate glass, and start grinding away.

1tri2god2 years ago
While I think I've seen variations of this method elsewhere, you've done an awesome job! Inventive, putting the text into the pics;)