Glass Dining Room Table "Etching"

Step 4 Sketch your design onto the tape.

You might want to start with pencil and sketch out your design, then go over it with a thick black sharpie when you are satisfied.

I warmed up on this piece of cardboard and tried out a few motifs until I was ready to go.

Comments

[thefrogness]

also what you can do is paste photocopies onto the tape (with spray adhesive, i use 3M its the best!) and scalpel directly through the image. Thats what I'm doing for my sandblasted screens :)

[kirchmke]

I love this idea... A suggestion for someone who's not as artistic in doing the design: You can project an image using a projector and a printed transparency and then trace accordingly. I really love this idea! Thanks!