Introduction: Glow in the Dark Bowling

Picture of Glow in the Dark Bowling

Ever wanted to play bowling in the dark? No? Me neither! But anyway, I'm going to show you how to make Glow in the dark bowling pins!

Step 1: Things You Need

Picture of Things You Need

*6 or more plastic water bottles
*Children's play sand
*Glow sticks

Step 2: Clean the Bottles

Picture of Clean the Bottles

Open all the bottles and wash the remains of the drink out. let them dry completely.

Step 3: Add Sand

Picture of Add Sand

Fill the bottles about 1/4 of the way up with the play sand. using a funnel makes it a lot easier!

Step 4: Add Glow Sticks

Picture of Add Glow Sticks

Nearly done now! All that's left is to add a glow stick to each bottle and screw the cap back on!

Step 5: Play!!

Picture of Play!!

Arrange the bottles in a triangle formation and make a mark about 3-5 meters back. Roll a ball from the mark and try to knock them over!


wbannister (author)2014-10-29

no, I used a kids football instead off a bowling ball, it was used in the house mainly

About This Instructable




More by wbannister:RC crawler scale aerial Glow In The Dark Bowling
Add instructable to: