Print PDF
Favorite
Email
Step 10Final steps
Plug the usb-cable in the pcb of the hub, place it in its new case...
Then glue everything in place and put the video tape back together and screw the screws back in their places.
Plug the usb cable to a free port, pull the powercable through an opening of your case and plug the power connector to it in...
Then glue everything in place and put the video tape back together and screw the screws back in their places.
Plug the usb cable to a free port, pull the powercable through an opening of your case and plug the power connector to it in...
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
