Instructables
loading
loading
Picture of How to Make Glue Bugs
P5250005.JPG
100_0127.jpg
PB050023.JPG
P5250020.JPG
P5250023.JPG
Underside.jpg
100_0157.jpg
P5250012.JPG
PB050023.JPG
This instructable shows a unique art form...using hot melt glue to make various insects and spiders. Other creatures can be made as well, but that is the subject for another instructable.  Use care if attempting this procedure as there is some risk involved: primarily with the hot melt glue, the razor scraper and the heat source used to mount legs.  Do not let children attempt  these steps.  An adult can supervise certain steps of the procedures.
 
Remove these adsRemove these ads by Signing Up

Step 1: Tools and Supplies Needed

Picture of Tools and Supplies Needed
PB050003.JPG
PB050001.JPG
PB050011.JPG
Main tool is the glue gun for this project.  I use both a large and small gun, depending on the project. A few small pieces of glass to place glue on, a razor scraper, some pliers and wire cutters are useful as well.  Have enough glue sticks on hand for the projects, some thin gauge wire (solid copper and or florist wire works well. I have several gauges of wire on hand), acrylic paint and brushes.

Step 2: Make The Basic Body

Picture of Make The Basic Body
PB050012.JPG
Using the glass plate, just squeeze out enough glue to make a round or oblong mound of glue.  Let cool and harden, and the first step is completed. 

Step 3: Make Additional Body Parts

Picture of Make Additional Body Parts
P5250023.JPG
P5250022.JPG
P5250019.JPG
P5250012.JPG
For the bugs made, remember: head, thorax and abdomen....See pictures as to how this works with the glue.  For the spider, two parts are sufficient, but bees, dragon flies, ants and flies have the three distinct parts.

Step 4: Scrap Body Off of Glass Plate

Picture of Scrap Body Off of Glass Plate
This is another step that has some danger connected with it.  I use a razor scraper as shown, and it demands all my attention when doing this.  DO NOT LET CHILDREN USE THIS TOOL!  With care, I gently "jab" at the glue until it is completely released.

Step 5: Make Legs From Wire

Picture of Make Legs From Wire
PB050014.JPG
PB050006.JPG
Here, I have cut my wire into manageable lengths.  Cut six pieces for insect legs, and eight for the spider(s).

Step 6: Attach the Legs to the Body

Picture of Attach the Legs to the Body
In this step, I use the stove to heat the legs ever so gently so that they will "melt" their way into the bodies. The needle nose pliers are used to hold and insert the wires.   If you attempt this, use  extreme care to avoid being burned. Needless to say, do not let children attempt this step.  Definitely an adult thing.

wooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooow

dmay52 years ago
Love this instructable! if you glue your dots on non stick foil instead of glass they peel right off - no need to scrape!
gothgaluk3 years ago
only one thing i can say.....AMAZING!!!
Creativeman (author)  gothgaluk3 years ago
Thanks, glad you are impressed!
taria3 years ago
so cute, I might try this later when I get my stuff back.
moGuyver4 years ago
A fellow arthropod hobbyist!  Very interesting method - I wish I could get my wife to wear earrings made from these.  Thanks for sharing.
halla4 years ago
soooooooooooo amazing and easy to make
thanks lots
great idea i will try it
Creativeman (author)  halla4 years ago
You are welcome, halla. do try it, it is fun! Cman
i absolutely love the dragonfly and have to try this....what an awesome idea!!!! thanks for the instructable. very talented and btw, are the butterflies also glue???? dragonfly
Creativeman (author)  dragonflydazd4 years ago
Thanks for the comments. Butterflies are not glue, just part of the mini-diorama here. If you follow this instructable you can make the dragonfly...just get out your glue gun, a piece of glass or metal and start practicing...put on a drop, let cool, add a drop...think long body, many sections, etc...you'll get it...when all cools, paint, cut wings, glue in place with epoxy or gorilla glue, and you're done! Piece of cake. Cman
creativeman, i would love to see a more detailed instructable for the dragonfly if at all possible. thanks so much dragonfly !!
dakellymon4 years ago
great idea, I can't wait to do this with my grand daughter. Thanks for sharing.
Arbitror5 years ago
Woah! I'm pretty impressed! Some even look real...
pinkbluedky5 years ago
Coooool!  I can't wait to try this.  I clay sculpt so this will be FUN!
pie R []ed5 years ago
 This is such a great idea
Vulcanator5 years ago
don't put your meth in that bottle.
you will get itchy lol.
noobie6055 years ago
when ur making your bugs dont use the glass use a small sheet of metal because hotglue doesnt stick to metal and you can just pop them off with your fingers
BigMac965 years ago

AMAZING! 5 *'s!

l8nite5 years ago
this is beyond cool !  I will definately be giving this a try very soon...
Ditto!
meddler5 years ago
This, is cool..
Kaiven5 years ago
Another cool Instructable! Very creative :D
Creativeman (author)  Kaiven5 years ago
Thank you!
Jayefuu5 years ago
Amazing! The grasshopper is my favourite. I know it's not a bug but do you think you could create a hedgehog by layering up glue and then the final layer drawing out spikes with a toothpick? I'd love to see instructions on how if so.
Creativeman (author)  Jayefuu5 years ago
See my other instructable: How to make glue monsters!
jdtwelve125 years ago
Simple design.  Beautiful work.  I suspect that the real artistry is in being able to paint them well, as you have.
Creativeman (author)  jdtwelve125 years ago
Thanks jd.
jdtwelve125 years ago
Curious about steps 5 & 6... do you bend the legs to shape before heating them, or after they've been inserted and re-hardened?
Creativeman (author)  jdtwelve125 years ago
Either way...use two pair of pliers in some cases to prevent the leg from putting stress on the body. If the leg is to be covered with glue, shape should be established first.
wenpherd5 years ago
These are awsome.
scoochmaroo5 years ago
So, so good.
Creativeman (author)  scoochmaroo5 years ago
Thanks, scooch.
Ninzerbean5 years ago
 Wonderful!
Creativeman (author)  Ninzerbean5 years ago
Thanks Ninzer.....