Instructables
Picture of Glue Prank
This is one of my most favorite pranks ever. You can substitute water in for glue if you would like. Happy pranking!!!!:):):)
 
Remove these adsRemove these ads by Signing Up

Step 1: Materials

Picture of Materials
Get some tape, glue, and some thread.

Step 2: Step 2

Picture of Step 2
Unscrew the cap of the glue. And then make a tape donut and stick it to the back of the glue bottle.

Step 3: Step 3

Picture of Step 3
13 10:08 AM.jpg
Cut 4-2 ft pieces of thread and tape them to the front of your glue bottle one at a time. Cut the thread so that all 4 of them are equal.

Step 4: Step 4

Picture of Step 4
13 10:08 AM.jpg
13 10:08 AM.jpg
Tape the ends of all the thread pieces to the corner of a door. Then tape the glue bottle to the wall above the door like in the picture. You can add more tape to keep the glue bottle up if needed.

Step 5: The Prank

Picture of The Prank
Now just sit back and relax and wait for your prank victim to get soaked with glue the second they walk through the door!!!:):) if you liked this prank please favorite and vote!!!:):) thank you so much!!!:):)
CreativeGeek11 months ago
Now had that been about three colors of poster paint that the string was tied to all at the same time, in addition, if the glue was swapped for white instead of clear... X3
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!