Go-llerblades: Motorized Skates - Part 2

Step 4 Film Yourself [video]

An have a rocking good time, whizzing around a parking lot with your friends.

Motorized roller-hockey?



Results
The switch was definitely wonderful to have, the bike tubes quite convenient.

On the other hand, I learned that urethane grips less-well than a wire brush,. Also, with the actual wheel, I did not go as fast as I did with the wire brush. Possibly a bigger, heftier wheel would do the trick - or I'll just stick to the wire brush.

Comments

[RamDragon]

My inner Mad Scientist just unleashed a frighteningly evil laugh. I'm seeing the grinder dissembled further and attached in an under slung position along the rail... The mantra of mad scientists everywhere, "power's a bit of a problem, though."

[haxor98]

Nice, im planning to make some too.
Can you upload a better video though? one thats not in the dark so we can see how to stand when using etc.

Thanks for making this by the way =]

[wishes]

or you could permantly attach the grinder to a wheel of the old style 4 wheel roller skates ? this looked cool except for the speed (or lack of). though you wouldnt want too much in case you fell :O Now im having visions of 2 angle grinders each attached to a wheel on either side of a wooden platform that you can sit on (wide skateboard?). ....