Print PDF
Favorite
Email
Step 5Head band part 2
I used the metal rings to act as a transition between the thinner adjusting and side straps, and the thicker back pad.
I cut strips of leather the the right width for the buckle ,there are five pieces total: 2 short ones that are attach the metal rings to the pad in the back, 1 longer piece to attach the metal ring on the left side to the eye cup, 1 long piece to connect buckle to right eye cup, and 1 long piece for the adjusting strap through the buckle.
Each one of these pieces is stitched with the sinew to it's appropriate place... it's hard to explain so the pictures are probably easier than words.
I cut the adjusting piece to a point at one end and used a small leather punch to make holes.
I cut strips of leather the the right width for the buckle ,there are five pieces total: 2 short ones that are attach the metal rings to the pad in the back, 1 longer piece to attach the metal ring on the left side to the eye cup, 1 long piece to connect buckle to right eye cup, and 1 long piece for the adjusting strap through the buckle.
Each one of these pieces is stitched with the sinew to it's appropriate place... it's hard to explain so the pictures are probably easier than words.
I cut the adjusting piece to a point at one end and used a small leather punch to make holes.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
