Instructables

Step 8: Hat

Picture of Hat
DSC01099.JPG
DSC01100.JPG
DSC01101.JPG
DSC01102.JPG
DSC01103.JPG
DSC01104.JPG
DSC01105.JPG
If you didn't cut your ribbon piece out before, do so now.  Then take the top part of your hat and the bottom and cut them out of paper.  I opted for a straw hat so I used brown, but the color is really up to you.  Once all the pieces are cut out fold the tabs of the ribbion and the top of the hat over.  place glue on the edge of the ribbon as well as the tabs.  place them on the bottom of the hat.  You may have to hold this for a while as the glue dries. 

Then take the top part of the hat and place glue on the tabs and place it on top of the ribbon.
 
Remove these adsRemove these ads by Signing Up