With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
I made a piece that can be added to a cauldron to make it look like it is bubbling. This piece was made to fit around a person sitting in a large caul...
I took a large round piece of cardboard and cut a portion out of the top and the bottom, that gives it an axe shape. The size you cut this will depend...
I covered the cardboard with aluminum foil. I cut wiffle balls and round styrofoam balls in half and then hot glued them to the cardboard base, these ...
Turn the lights on and see if you like the arrangements of your lights. You may want to move some of them around if you have too many lights in one ar...
You will need a can of Foam Insulation Great Stuff. Make sure you put on some latex gloves to protect your hands. Place your project on some newspaper...
After it dries you can plug the lights in and see how it looks. It should have a lava look to it. After dried I also added some paint. I used some cra...
When dried add to you cauldron and make sure you have a good fit. If everything looks good, just plug it in, add a body and you have yourself a victim...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »