Print PDF
Favorite
Email
Step 3Cut the door
I used a plastic party cup to outline the pockets. I just lined it up one inch from each side on the corners and extended the lines with a straight edge. I cut these out with a dremel.
Similar process for the side pockets. Remember that you're building this on a cheap interior door, so the corner pockets will be quite easy to cut because it's hollow EXCEPT where the handles would go. (i.e. side pockets) So remember that the side pockets will be harder to cut.
Check the professional artists rendering for a perfectly-to-scale drawing of this process.
Similar process for the side pockets. Remember that you're building this on a cheap interior door, so the corner pockets will be quite easy to cut because it's hollow EXCEPT where the handles would go. (i.e. side pockets) So remember that the side pockets will be harder to cut.
Check the professional artists rendering for a perfectly-to-scale drawing of this process.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
