Print PDF
Favorite
Email
Step 3The round bits 1
I now used the trusty circular saw to cut loads of 1 inch by 15cm strips of MDF and began to glue and nail them between the front and rear baffle.
Keeping them as close to each other as possible is a good idea.
I forgot to say, that I used a jigsaw to cut the baffles out.
Keeping them as close to each other as possible is a good idea.
I forgot to say, that I used a jigsaw to cut the baffles out.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
