Print PDF
Favorite
Email
Step 7Paint
once all the holes were cut on the front I drilled a hole of about 12mm on the top and 3mm on the back(more about them later) and masked the edges up.
I spray painted the baffle in matt black, I didn't really have to in the end but at this time i wasn't sure if I was going to make a grill or not.
Once the black was dry I removed the masking tape and applied the first layer of white primer.
I got excited at this point because it started to look good so I popped open my first beer.
I know you shouldn't drink and use power tools but, Hey! it's fun.
I spray painted the baffle in matt black, I didn't really have to in the end but at this time i wasn't sure if I was going to make a grill or not.
Once the black was dry I removed the masking tape and applied the first layer of white primer.
I got excited at this point because it started to look good so I popped open my first beer.
I know you shouldn't drink and use power tools but, Hey! it's fun.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
