This extends and, hopefully, improves and simplifies the instructable mentioned above. This version of the tripod folds flat and allows for a variety of upper camera mounts. This increases the number of angles at which a (lightweight) camera can be held. It retains all of the advantages of the Loc-Line model -- flexibility, durability, and general coolness.
Step 1: Blah Blah Blah
Step 2: Tools and Materials
This is interesting and fun stuff from ModularHose.com, master distributors of Loc-Line modular hose. Buy the pliers for assembling segments and connectors. Buy lots of this stuff because it just has to be useful for other projects. It's expensive enough that it better be useful.
41401 Loc-Line Hose Segment Pack for 1/4" system
41406 Loc-Line 1/4" NPT Connector for 1/4" system
Each tripod uses four (4) of the connectors (they come in four packs) and 24+ segments of hose (8 apiece for the three legs; additional pieces for extensions). Each two pack of hose contains 2 x 10 segments.
The base can be of any material that can be tapped with a 1/4" NPT tap. I used a small block of mahogany (scrap that I had kicking around from a project from twenty-five years ago) but a chunk of wood, metal or plastic would work as well.