Step 3: Leveling

I could have used shims to level everything out before hand... But whats the fun in that...

Soooo After securing the backer board and finishing up for the day, the next day I realized that I had not checked the level beside the dishwasher... The answer?
Self-leveling concrete.
It works like a charm- I had to "build" a duct tape form for the front besides the dishwasher and tape off the back to make sure none of the concrete dripped behind the dishwasher.

Mix up the mix so its a water consistency. (It dries quickly). Spread it out and let it dry.

You could have skipped this step by putting shims under the ply, or between the ply and cement board.
Thankyou for posting this. I've been looking to replace the current countertop with a <a href="http://www.haristoneslimited.com/catalog.php?info=GRSL" rel="nofollow">granite countertops in Vancouver</a>. Any idea how much this would cost?
Thanks again for your help with <a href="http://www.rockstella.ca" rel="nofollow">granite counters mississauga</a> !
It looks great! I would love to install some <a href="http://www.rockstella.ca" rel="nofollow">granite counters in mississauga</a>. I think it would be a great upgrade!
These are some beautiful granite counter tops! I want to do this to my kitchen so bad! Where is a good place to get <a href="http://www.haristoneslimited.com/stones.php?search=types&material=Granite" rel="nofollow">granite in edmonton</a>? Is granite expensive? Where can I learn more about this? Thank you for your help!
Thanks for sharing this. We really want to get some <a href="http://www.diamondgraniteaz.com/" rel="nofollow">kitchen remodeling in Tempe, az</a>. Ours is super old and really need to get some help. I will have to tell my wife about this and see what she thinks.
This is so awesome thanks for sharing this great kitchen! I have really been looking into <a href="http://www.smartcarpentrykc.com" rel="nofollow">home remodeling lees summit mo</a> lately trying to figure out about what I want to do to my house and kitchen and I think this has helped me decide what I want to do! Thanks for sharing!
Do you live near NYC? I'd love to hire you to make a granite counter for my kitchen. Beautiful work!<br>
I would have put a bead of clear silicone caulk between the tiles. Since they're butted together and all
Nice instructable and beautiful work. Can you show a picture of the unpolished edge mentioned in step 4 after the stone sealer is applied? I'm really curious as to how it turned out.
Check out step 4
What a wonderful job! I would love to have granite but didn't know how to make those grout lines less obvious--you solved the problem for me by finding the right kind of grout for a nearly seamless look. And can I ask where you got that beautiful, unique sink?
I got the sink at Home Depot or Lowes. Its a composite granite sink. You can mount over or under the countertops.
do you think it was necessary to remove the laminate? why not just tile over it?
You would still have to attach the backboard to the laminate and this would add an extra 1/2&quot; to the front 2&quot; overhang. This was more than I wanted. It would make it look too thick for my liking. My sink size was different and I wanted the countertop to go all the way to the wall and that would have caused me to have to take off the built it laminate &quot;backsplash&quot;.
Check out my instructable on cutting large tile on tiny table saws:<br>http://www.instructables.com/id/Cutting-large-stone-and-porcellain-tiles/<br>I was cutting 24&quot; tiles on a tiny hobby 7: saw.<br><br>Other people suggested rotary saw with diamond blade---your method, but using a fence clamped to the piece. I think it would have worked too.
great job might have to do something like this myself
BEAUTIFUL!!! Very Well Done!!! If you want an easy backsplash to go with that great counter you can either coordinating tile or texture with drywall mud and paint!!! Thanks for posting and enjoy!!!!
Thanks! The original plan was to put in glass tile- a greenish color. But I think it might make it too glossy- the cabinets already have a sheen to them. I dont know if Im the biggest fan of textured drywall, but thanks for the input.
Nice job &amp; great Instructable ... DH and I are thinking along the same lines for kitchen countertops because we have WAY too much counter and not enough moola for a full granite slab. FYI ... textured drywall as a backsplash is a BEEYOCH to clean. I'm speaking from ongoing experience. Don't do it! We're thinking either subway tiles (easy to clean) or stainless steel (very easy to clean).
Your stainless idea. How would you connect two pieces together seamlessly? A good polished weld would still show up, wouldn't it? I do like the look of hammered copper. But I would still run into the seam issue.
cool. nice job. do you need to use backer board when putting up the backsplash? ...and how much did that faucet set you back? i see those &quot;incorporated&quot; sprayers in most of the kitchen hardware these days, and was wondering how you like it compared to the older 2 piece style faucet?
I'm not going to bother putting up backer for the backsplash. I paid just under $200 for the faucet. The sink the I have was a gift and there was a one hole cutout for a sink. I've really liked having a large one bowl sink and the faucet works very well with it.
Beautiful job! I think it would be amazing to do the backsplash with the same granite tile as the countertop. But, the green glass tile would be beautiful as well...I don't think they would be too glossy...the wood cabinets are a warm counterpoint to the granite and/or glass. Whatever you decide to put on the backsplash, it looks and performs best when you go all the way up to the stove hood and keep that height/line for the other areas. This offers great protection for the wall behind the stove top, and looks high-end.
Personally, if I had tiles that size, I would do a countertop that extended 31&quot; from the wall with the cabinets, etc pulled out as well and use 2x4 on the wall to support it. I think a countertop that deep would be wonderful! Plenty of space for appliances AND working space too! Of course I'd never get DH to agree so I guess I'd use the 6&quot; I cut off to make a short backsplash 'cause no way would I get to spend the money for a backsplash like I'd want! Great job on your project.
Lumpybat; There is no arsnic in the solution used to treat wood any longer. But I still don't think it should be used in the kitchen where the preparation of food takes place. But I would agree that ordinary ply would have been okay just seal it to be sure. How ever, the job turned out Greatttt. Way to go!!!! Ajah
Great job, looks nice. I'd be concerned with using pressure treated plywood indoors though. I'm not sure if pressure treated still means that arsenic is used, though new pressure treated may have had the toxics removed. I would think that regular plywood under the hardie board would've been fine, work well for floors.
Beautiful! I am inspired to do the the same at home. Thank You!
Brotha that is some fine work you have done there...good job!
I did the same thing a few months ago. I used two layers of 1/2&quot; ply and a layer of 1/2 concrete board. 24x24 Ceramic tiles with 1/16&quot; Quartz-Lock grout. I would say if you are going to do a new top on a budget this is the way to do it.
Well done!
&quot;My reward for the day&quot; Just one?!?! Ought throw back 6-8 of em! Great job and great instructable. I am gearing up to do this same work myself at my wife's pre-marriage condo.

About This Instructable


151 favorites


More by rory_woj: Granite Tile Kitchen Countertops
Add instructable to: