Picture of Grow a square watermelon
This is really, really easy to do. (Note: you may be able to use this technique to grow other stuff in the form of a square ( actually in the form of a cube) and apply the general idea to other shapes.)

Step 1: Materials and tools

Picture of Materials and tools
You need 6, 8" square, 3/8" thick (or thicker) sheets of polycarbonate plastic. (Lexan)

You will need 4 gate hinges and 2 hinged clasps with flat head machine screws and hex nuts plus at least 8 or more 1" to 1-1/2" long, thin wood screws and possibly a 36" length of angle iron or aluminum angle (cut to 8" lengths to yield four pieces) if you have thinner polycarbonate, a power drill and hole saw, and a hand saw or power saw such as a jig saw.

1-40 of 262Next »

Ah, you don't need this, just pick up one of these square cans and you're set.

jeffcole4 months ago

They look like minecraft fruit :)

kcls5 years ago
I can see it now- instead of a watermelon, grow a pumpkin in a cube shape. Then, carve a Domo-Kun face on it. Voila! Domo-Kun Jack-O-Lantern.

I've got dibs on the 'ible.
melonmoldcom kcls6 months ago

We did pumpkin last summer/fall. They turned out great!

Best Jack O latern on the block!


omnibot kcls5 years ago
Do it!
kcls omnibot5 years ago
Gotta wait until I have a garden to grow it in! Living on a boat and all, I don't have a very big yard :D
emma.bigknife kcls10 months ago

You just have to be imaginitive about where to grow. I have seen people grow things on walls and roofs. Doing this also cuts cooling and heating costs.

you don't need a garden i grew a pumpkin in a large pot and trained the vine to a railing. when fruit formed i used pantyhose to support the weight.
you do, it's just REALLY flooded
So... rice?
aseaheru xenor4 years ago
salt water.......o_0
put it on the mast head. o_0
Hiroak kcls5 years ago
I'm on a boat Motherfu Ha ha very orginal I know I lived on a boat, the sail type for 2 years and build floating garden boxes out of blue foam board. I had a slip larger than my boat so I just attached them to the dock. Then I got a bigger boat and build two above ground planter boxes on the deck. I even tried to grow an orange tree, to combat the scurvy but I live in Alaska.
huh ... seems many guys are really interested in the pumpkin .....why don't we just make a mold for the pumpkin ,but what shape you want it to be ??
melonmoldcom made it!6 months ago

It's that time of the year again! Get your plastic molds now at melonmold dot com!

Great summer project and fun for the while family! Grow a watermelon or pumpkin into a square or heart!

MelonMold dot com

davidbarcomb9 months ago

I saw this in a Japanese show and it was really nice. Great instructable

scott.gosa1 year ago

$80 for materials? Geez!

For those of you lacking either the time or tools to complete this task, we offer a commercial box mold specifically for molding watermelon at MelonMold.com. We're inexpensive and ship internationally from the US.



The actual size of the melon your mold will produce
is 7.5” at its tallest point and 7.5” at its widest. It is 7.5” at its
deepest point.


Does the Box have to clear and made out of plastic?
it is better be clear cos the fruits need sun to grow to look better , and plastic seems to be the best choice we have by now ..

I read the other day about a japanese guy who managed to make a hearts shaped watermelon 'after many years of research'. Then I already knew it was bogus as it is just a matter of the right mould and here I see those are available already.


fashboy1 year ago

'This is really, really easy to do.' OMFG SO EASY

i have tried this method ,but seems not easy .....we have grown some like the below one :

Suppliers for plastic square box mould for square watermelon.jpg
it is great job to make this square watermelon box ,but very time consuming ...
why don't you just come and buy one very easy ,it just cost you like $10 , will save you a lot of energy .for anyone interested , come to www.fruitmould.com
oh ,by the way , i have a client grown a lot of square shape watermelons , he got many experience on this ..check the photo
i bet you don't need all the hardware. you can probably use big rubber bands to hold the form in place.
good request , but you are really underestimate the growing stress from watermelon , it is a big guy :-)
Would a box work? I do not have the ability to make your cool invention
if your box is strong enough ,then it should work ,yes, to make one mold is really practical skill...
elkrivermr2 years ago
how do you deal with rain and condensation?
rain will not affect the growing ,because even with some rain store inside of the molds ,it will be gone soon by the sun shinning ,isn't it ?
sinnae2 years ago
I feel like this would introduce a ton of moisture-induced rot unless plenty of ventilation is drilled into each panel.
yes , you are right , it has 4 holes on the size wall of the molds to keep ventilation ,the sun shinning might be really strong , you need to cover the black net at the beginning ...
Not4Guy1 year ago
I wonder if this could be doing to shape a pumpkin into a skull for witches hat?
this polycarbonate plastic made square mold can be used on pumpkin ,but it is really hard to say if can success , depends on the mold thickness and the pumpkin stress ,ours are 3mm thickness ,should be strong enough for pumpkin , go www.fruitmould.com , check more shaped fruits ,you will be amazed for sure ...
OH, this polycarbonate plastic made square mold looks good ,but we also have another injection made square mold for watermelon which is well tested in past few years,check www.fruitmould.com , you will find more amazing shaped fruits ...great fun :-)
Nukeman3 years ago
The Lexan to build this costs about $80. Will plywood work?
myakka3 years ago
How about triangular( pyramid) shaped ones. Or dodecahedrons!
1-40 of 262Next »